To help identify your grinder, if the round plate with the holes is 3 15/16 inches in diameter and has a 9/16 or .58 -.60 in. hole in the center--you probably have a #32 grinder
|
| Knife for #32, Imported. (Item # 699981) Reasonably priced!
|
|
| Grinder Knife for #32 (Item # 700057) U.S. or German made
|
|
| ***Stainless Steel Grinder Knife for #32 (Item # 666900)
|
| # 32 Grinder Knife (Item #700020) Commercial quality knife. Has carbide cutting edges for long wear. Resharpenable.
|
|
| Grinder Plate for #32 grinder w/ 2 mm. holes. (Item #699650) This size plate is often used for all sorts of fine grinds. Probably not good for meat. It is very fine!
|
| #32 Grinder Plate 3 mm (1/8") (Item #699995)
|
| German Made #32 Grinder Plate 3mm (1/8") (Item #699560)
|
|
| Grinder Plate - This plate has 4mm. (3/16") holes.
(Item #699561) It is used for a hamburger grind
|
|
| Grinder Plate for #32 grinder w/ 4 mm. (3/16") holes. (Item #699972) This size plate is often used for a hamburger grind.
|
|
| Stainless Steel Grinder Plate for #32 grinder w/ 4 mm. (3/16") holes.(Item #700096) This size plate is often used for a hamburger grind.
|
| #32 Grinder Plate (Item #700055) 3/16" holes good for hamburger meat.
|
| #32 Grinder Plate 6mm 1/4" (Item #699562) Hard Carbon Steel made in Germany! Plate for #32 grinder especially for sausage grind.
|
|
|
Grinder Plate for #32 grinder w/ 6 mm. (1/4") holes. (Item #700070) Less expensive carbon steel plate from China. 1/4" size plate is often used for a sausage grind.
|
|
|
Stainless Steel Grinder Plate for #32 grinder w/ 6 mm. holes (Item # 700089) This size is often used as a sausage grind
|
 | Grinder Plate 32 1/4" 6MM (Item #699973) Grinder plate for grinding meat. Hub style for easy removal.
|
|
| Grinder Plate for #32 grinder w/ 8 mm. holes (Item # 699974)
|
| Stainless Steel 8 mm Grinder Plate for #32 Grinder (Item #700071)
|
|
| Grinder Plate for #32 grinder w/ 10 mm. (3/8") holes and a hub. (Item #699975) This plate is often used for a chili grind.
|
|
| Stainless Steel grinder Plate for #32 grinder w/ 10 mm. (3/8") holes. (Item #700072) This plate is normally used for a chili grind.
|
|
| Grinder Plate for #32 grinder w/ 12 mm. (1/2") holes and a hub. (Item #699976) This plate is often used for a course chili grind.
|
|
| Tooled steel Grinder Plate for #32 grinder w/ 12 mm. (1/2") holes. (Item #699564) This type of plate is often used for a course chili grind.
|
| Stainless Steel 1/2" 12mm Grinder Plate (Item #700022)
|
|
| Grinder Plate for #32 grinder w/ 15 mm. (5/8") holes Imported (Item # 700073)
|
|
| Bean plate for #32 grinder (Item #666899) This plate is used for stuffing sausage.
|
|
| Spacer for #32 grinder (Item #699709) This spacer is used for stuffing sausage.
|
|
| Stuffing Tube for #32 Grinder 3/4 in. (Item # 699986) For stuffing standard sausage.
|
| Stuffing Tube for #32 Grinder
1/2 in. tube (Item #699999) For smaller sausages.
|
 | 3/4" Grinder Tube for #32 Meat Grinder (Item #600500) Stainless Steel grinder tube.
|
 | 10 mm Tube for a #32 Meat Grinder (Item #632152) Stainless Steel grinder tube.
|
| #32 Tube 2" diameter (Item #699886)
|
|
| Cast Pulley for #32 Choprite Grinder (Item # 699952). Designed for Chop-rite Brand but will fit other grinders. * Potentially dangerous when added to Meat grinders. Can cause amputation possibly death! Use only with meat pusher.
|
| Grinder Extension for #32 Grinder (Item #699782) Important safety feature for motorized grinders. Ifyou intend to motorize your grinder, you should put this extension onto your grinder. The picture shows the extension mounted on a #22 grinder. It also shows the #699783 pan mounted on the extension which can be purchased separately.
|
| Grinder Pan (Item #699783) Replacement Grinder Pan. Holds extra meat in preparation for grinding. This pan has a 2.5" throat. Measures 9.75" x 13.75". Throat extends 2". This pan fits the aluminum safety extension cones for the #12, 22, & 32 grinders.
|
|
| Grinder Pan (Item #655005) Replacement Grinder Pan. Holds extra meat in preparation for grinding. This pan has a 2" throat. Pan Measures 9.75" x 13.75". Throat extends 2"
|
|
| Stainless Steel Grinder Pan (Item #699630) Has a 2.25" Throat. Measures 9.75" x 13.75". Throat extends 2". Fits #12 American Eagle Grinder.
|
| #32 Front Ring Nut-Porkert (Item #610900)
|
| #32 Thumbscrew-Porkert (Item #610901)
|
| #32 Hand Crank-Porkert (Item #610902)
|
| #32 Auger-Porkert (Item #610903)
|
| Grinder Bushing 1 inch i.d. X 2 inch
o.d. (Item #699949) Bushing for #32 grinders and some 22 electrics. (Item # 699949) Provides thrust and a bearing surface so that the knife and plate can be forced together.
|
 | Stud for #32 Leonardi Meat Grinder (Item #699680) Fits 12 mm. thread.
|
|
| Stud for #32 Choprite Meat Grinder (Item #699524) Fits NC 1/2-13 thread. Square drive is .565 or slightly more than 9/16"
|
|
| Stud for #32 Porkert Meat Grinder (Item #699623) Fits 12mm thread.
|
 | Bearing & 2 races for Universal Brand #32 w/pulley (Item #699900) Race has id of 30.65mm and od of 52mm with a thickness of16 mm. Used to thrust auger toward knife & plate to tighten them.
|
 | Grinder Bushing #32 (Item #700170) Plastic grinder bushing for Porkert Grinders. i.d is 1.005" o.d. is 1.257" flange o.d. 2.15" thickness of flange is 0.16"
|
 | Grinder Bushing #32 (Item #700172) Plastic grinder bushing for Fachem Grinders. i.d is 1.204" o.d. is 1.60" flange o.d. 2.59" thickness of flange is 0.12"
|
 | Grinder Bushing #22,32,42 (Item #700173) Plastic grinder bushing for Weston Electric Grinders. i.d is 1.34" o.d. is 1.5" flange o.d. 2" thickness of flange is 0.16"
|
 | Snack Stick Kit #32 (Item #600543) This is the only way to make snack sticks or pepperoni with your grinder. Kit comes with all you need to make a great snack the whole family will love.
|
 | Grinder Bearing (Item #699423) Sealed Universal Grinder Bearing.
|
| Feed Chute and Stomper (Item #821007) Fits #22 or #32 grinder to extend and add room to put meat. Includes stomper to safely push meat through.
|
 | Gearbox for #22 - #32 Meat Grinders (Item #645640) New!! Saves time! Great Price! Want to get away from cranking that Meat Grinder? Got a lot of Meat to grind and not a lot of time or help??? Convert your Manual Meat Grinder into an electric unit in minutes with your Electric Drill!!
|
Home | Meat Grinders | Meat Grinder Parts | Sausage Stuffers | Meat Tenderizers | Manual Meat Grinders Meat Slicers | Electric Butcher Saw Blades | Electric Butcher Saws | Books & Videos | Sausage Spices | Meat Mixers | Bowl Choppers | Knives | Patty Presses | Wrapping Paper & Accessories | Sausage Casings & Twine | Meat Curing and Smoking | Site Map
