For New Vacuum Sealers, Click Here.
Need to Fix your Machine?Parts for ProProcessor Vacuum Chamber Machines
(Fits other imported commercial vacuum sealers too)
While we are glad to offer replacement parts for vacuum chamber sealers, We do not warranty the electrical or pump parts.
| Vacuum Machine Pump & Motor (Item #646593) Replacement pump & motor for 20" & 24" ProProcessor vacuum chamber sealers that are 220 volt. Will also fit 220 volt dz-400 and DZ-500 vacuum machines. Check the plate on the motor you are replacing... Pumps 25 cubic meters / hour, 900 Watts. 220 V.A.C. This pump is on all the newer (2023)ProProcessor dual chamber machines that we sell. yellow/green wire is ground.
|
| Vacuum Machine Pump & Motor (Item #646640) Replacement pump & motor for 16" & 20" ProProcessor vacuum chamber sealers that are 110 volts. Will also fit 110 volt dz-400 and DZ-500 vacuum machines. Check the plate on the motor you are replacing. Pumps 25 cm/hour, 900 Watts. 110 V
|
|
| Vacuum Machine Pump & Motor (Item #646639) Replacement pump & motor for 16" & 20" ProProcessor vacuum chamber sealers that are 220 volt. Will also fit 220 volt dz-400 and DZ-500 vacuum machines. Check the plate on the motor you are replacing... Pumps 25 cubic meters / hour, 900 Watts. 220 Volts This pump is on all the ProProcessor dual chamber machines that we sell.
|
 Compare the picture to your pump and motor. | Vacuum Machine Pump (Item #646626) 220V-240V/60hz, capacity: 8cfm, Vacuum: 5Pa, Model # XP155. Replaces the pump & motor on all of the 13" X 3" vacuum chamber machines Item(#646-600).
|
| Vacuum Pump Sight Glass (Item #646698) This Sight Glass fits pump for ProProcessorVacuum Chamber Machines. Has a flat side in the 3/4" hole or .78" diameter. Approx. 5 1/4" in diameter.
|
 |
Oil level indicator 1.3" dia. (Item #649-746) For checking oil level in Vacuum Chamber Sealers Actual indicator is flat glass instead of a bulb
|
| Motor Fan Blade (Item #646668) This fan blade fits motor for 20" Vacuum Chamber Sealer Machine. Has a flat side in the 3/4" hole or .78" diameter. Approx. 5 1/4" in diameter.
|
| Vacuum Chamber Pump Oil (Item #646625) ISO 46. Replaces the oil in your vacuum chamber pump. One quart of fluid.Can be used in dual chamber vacuum machines as well. Check the sight glass on your Vacuum pumps regularly! If the oil appears milky or if your pump doesn't appear to be pumping at full speed - it probably needs changing. There's a drain plug under the pump. This is especially more important in warm areas with high humidity. Don't ruin a $900 pump by trying to save $3
|
| Vacuum Chamber Pump Oil (gallon) (Item #646633) Replaces the oil in your vacuum chamber pump. One gallon of fluid. Check the sight glass on your Vacuum pumps regularly! If the oil appears milky or if your pump doesn't appear to be pumping at full speed - it probably needs changing. There's a drain plug under the pump. This is especially more important in warm areas with high humidity. Don't ruin a $900 pump by trying to save $15 on oil
|
| Contact Switch for pump (Item #646631) For 220 v.a.c. machines
|
| Pro Processor Transformer for circuitboard will also fit 300, 400, 500 (Item #646632) For 220 v.a.c. machines
|
| Pro Processor Transformer DZ300 (Item #646666) Transformer for single heat strip DZ300 220 Volt.
|
| Pro Processor 220 Transformer for Vacuum Sealers W/ 20" Double Sealer Bars (Item #646664) Transformer for single and dual chamber vaccuum sealers. Will also fit DZ 500 SE & DZ500 SE2 Vaccum Chamber Sealers. For 220 v.a.c. machines
|
| 11" x 11" x 5/8" Spacer Plate (Item #646634) Used for raising the level of the bags in a Vacuum Chamber Sealer.
|
No return on Electronic or electrical components.
| Circuit board for Vacuum Machine 300 ProProcessor (Item #646635) For 220 Volt machines
|
 
| Circuit board for Vacuum Machine 400-500 ProProcessor (Item #646655) For 110 & 220 v.a.c. machines Click on image for larger miage. Has total of 14 pins.
|
| Vacuum Panel PC Board Frame (Item #646681) Board Frame for a Commercial Vacuum sealer
|
| Circuit board Decal for Vacuum Machine 400-500 ProProcessor (Item #646654) For 110 & 220 Volt machines Fits DZ-400 & 500 Single Chamber Vacuum Sealer Machines.
|
| Bearing for Dual Chamber Vacuum Machine Arm (Item #646685)32mm X 15mm X 9mm For most dual chamber vacuum machines from ProProcessor and also for DZ500 dual chambers
|
| 20 Amp. Breaker for Vacuum Machine (Item #646647) Replacement Part for Commercial Vacuum Sealer Machine
|
| 40 Amp. Breaker for Vacuum Machine (Item #646648) Replacement part for Commercial Vacuum Sealer Machine
|
| Vacuum Chamber Machine Filter (Item #646619) Over time vacuum machine oil picks up impurities. Eventually the filter can become clogged. 2.75" dia. 5" long
|
| Vacuum Chamber Valve (Item #646658) 2" x 2" x 4.5"
|
| 20" sealer holder for Vacuum Machine. It has holes on each end for your wire bag holders. (Item #646730)
|
| Vacuum Chamber Combination Air Valve (Item #646686) 2 in - one out & up
|
| Vacuum Chamber Combination Air Valve (Item #646687) 2 in - one down & up
|
| Vacuum Chamber Valve (Item #646659) 2" x 1.5" x 7.5"
|
| Vacuum Chamber Valve (Item #646657) 2" x 2" x 4"
|
| Vacuum "T" Valve (Item #646674)
|
| Vacuum "L" Valve (Item #646675)
|
| Vacuum Chamber Contactor (Item #646661) 3" x 3" x 3" For 220 v.a.c. machines
|
 with cover without
| Vacuum Chamber Contactor (Item #646663) 3.5" x 3" x 3" For 220 v.a.c. machines
|
| Letters for Vacuum Machine (Item #646646)
|
| 20" sealer for Vacuum Machine. It has holes on one side for your letters and number pins. (Item #646645)
|
|
| 20" sealer holder for Vacuum Machine. It has holes on each end for your wire bag holders. (Item #646730)
|
| Pillow for 16" chamber Vacuum Machine. (Item #646689) Used to raise sealer bar to make seal. 12" long. If your seals are spotty or almost non-existant, it's either the pillow or the air valve that feeds it.
|
|
| Pillow for 20" chamber Vacuum Machine. (Item #646690) Used to raise sealer bar to make seal. 14" long. If your seals are spotty or almost non-existant, it's either the pillow or the air valve that feeds it.
|
Sealer Bars for ProProcessor Vacuum Sealers
 
| Sealerbar for 16" Dual chamber Vacuum Machine. (Item #646720) Complete with heat strip, tape and bolts Ready to install and connect wires. Also fits DZ-400 dual chamber machines.
|
 
| Sealerbar for 16" Single Chamber Vacuum Machine. (Item #646721) Complete with heat strip, tape , metal and bolts Ready to install and connect wires. Also fits DZ-400 single chamber machines.
|
|
| Sealerbar for 20" Dual Chamber Vacuum Machine. (Item #646722) Complete with heat strip, tape and bolts There are different dual chamber vacuum chamber machines on the market. Check carefully if they conform to these bars. These have one hole in the center to pivot on. 19.75" length. Also fits DZ-500 dual chamber machines.
|
|
| Sealerbar for 20" Single Chamber Vacuum Machine. (Item #646723) Complete with heat strip, tape and bolts and all metal. Ready to install and connect wires. Also fits DZ-500 single chamber machines.
|
Sealer Bars for VacMaster Vacuum Sealers
| Sealer Bar for VacMaster VP210-215 (Item #648006) VacMaster® replacement seal bar for the VP210 and VP215 VacMaster Chamber Sealers. Should be replaced at least every 5 years. Easy to install.
|
|
| 16" Sealer Bar for VacMaster VP300-325 (Item #648007) VacMaster® replacement seal bar for the VP300 and VP325 VacMaster Chamber Sealers. Should be replaced at least every 5 years. Easy to install.
|
|
| Sealer bar for VacMaster VP321-322 (Item #648008) VacMaster® replacement seal bar for the VP321 and VP322 VacMaster Chamber Sealers. Should be replaced at least every 5 years. Easy to install.
|
|
| 20" Sealer bar for VacMaster VP540-545 (Item #648009) VacMaster® replacement seal bar for the VP540 and VP545 VacMaster Chamber Sealers. Should be replaced at least every 5 years. Easy to install.
|
| Vacuum Sealer Kit 12in. (Item #646612) This is a replacement kit for the burner tape and metal strip on the vacuum sealer. Fits sealers with a 12" bar or shorter.Comes with 2 burner tapes and 2 metal strips.
|
|
| Vacuum Sealer Kit 16in. (Item #646613) This is a replacement kit for the burner tape and metal strip on the vacuum sealer. Fits sealers with a 16" bar or shorter.Comes with 2 burner tapes and 2 metal strips. Will fit on Item #646629, #646700, #646701, #646610 will also fit dz400 vacuume sealers
|
|
| Vacuum Sealer Kit 20in. (Item #646614) This is a replacement kit for the burner tape and metal strip on the vacuum sealer. Fits sealers with 20" sealer bars. Comes with 2 burner tapes and 2 metal strips. Will fit on Item #646667, #646703, #646702, #646611, #646609, #646606, #646605.will also fit dz500 vacuume sealers
|
|
| Vacuum Sealer Kit 24" (Item #648005) This is a replacement kit for the burner tape and metal strip on the vacuum sealer. Fits sealers with 24" sealer bars. Comes with 2 burner tapes and 2 metal strips. Will fit on Item #646228 will also fit DZ 600 vacuum sealers.
|
|
| Vacuum Sealer Kit for dual chamber 20" (Item #646693) This is a replacement kit for the burner tape and metal strip on the dual chamber vacuum sealer. Fits dual chamber sealers with 20" sealer bars. Comes with 2 burner tapes and 2 metal strips. Will fit on Item #646605. has wider tape.
|
NEW! | Vacuum Sealer Kit for Dual chamber 20" Narrow (Item #646729) This is a replacement kit for the burner tape and metal strip on the dual chamber vacuum sealer. Fits dual chamber sealers with 20" sealer bars. Comes with 2 burner tapes and 2 metal strips. Will fit on Item #646605. has wider tape. This heat strip width is only 8mm vs. 10mm on the standard sealer bars. This narrower strip is designed to seal 5 mil. bags quicker with less heat so they will last longer. Test them and arrive at your custom settings on these new strips.
|
| Split Bolt for Heat Strip 6mm x 6mm (Item #646692) For Commercial Vacuum Sealers. Body of bolt is 6mm or 1/4" which is smaller than most.
|
  | Vacuum Sealer Lid Gasket (Item #646616) This is the gasket for lid on the vacuum sealer. Fits our sealers with 16" sealer bars. 6mmx8mm .244"x.338" May also fit the DZ-400 Model,
|
|
| Vacuum Sealer Lid Gasket (Item #646617) This is the gasket for lid on the vacuum sealer. Fits our sealers with 20" sealer bars. 6mmx8mm .26"x.338" May also fit the DZ-500 Models,
|
|
| Vacuum Sealer Lid Gasket (Item #646618) This is the gasket for lid on the vacuum sealer. For 600 Model, Fits sealers with 24" sealer bars. 6mmx8mm .244"x.338"
|
1
  | Sealer Gasket for Dual Chamber Vacuum Machine (Item #646595) This gasket sealer fits some Dual Chamber Vacuum machines. 17mmx22mm .64"x.86"
|
|
| Sealer Gasket for Dual Chamber Vacuum Machine (Item #646597) This gasket sealer fits some Dual Chamber Vacuum machines. 13mmx19mm .50"x.75"
|
 | Gasket Sealer for Dual Chamber Vacuum Machine (Item #800101) This gasket sealer can help seat the sealer gaskets.
|
| Vacuum Sealer Lid Switch (Item #637014) Used to turn on Vacuum Sealer.
|
| Roller Switch for Dual Chamber Lid (Item #646678) 220 Volt, 5 amp
|
|
| Bearing for Dual Chamber Vacuum Machine Arm (Item #646685) 32mm X 15mm X 9mm Fits most Dual Chamber Vacuum Sealer Machines from ProProcessor. Also,fits DZ500 Dual Chamber Machines
|
| Lid For 16" Vacuum Chamber Sealer Machine (Item #646670) Measures 19" x 21"
|
|
| Lid For 16" Vacuum Chamber Machine (Item #646670) Measures 19" x 21" Includes sealer strip Fits some DZ-400 machines- Check measurements.
|
 | Vacuum Sealer Hinge Kit for 16" & 20" Vacuum Sealers (Item #698129) This is a replacement kit for the hinges on the 16" vacuum Chamber Sealer.
|
 | Vacuum Sealer Spring Bar Kit for 16" or 20" Vacuum Sealer (Item #646695) This is a replacement kit for the Spring Bar that holds up the lid on the 16" Vacuum Chamber Sealer Machine
|
 | Vacuum Sealer spring lid catch for 16" & 20" Vacuum Sealers (Item #646697)
|
| Lid For 20" Vacuum Chamber Machine (Item #646671) Measures 22.75" x 25.5"
|
| Swivel Caster for Dual Chamber Vacuum Sealer (Item #646615) This is a replacement caster for dual vacuum chamber sealer machine. 4.18" tall 2.87 wheel pattern 2.88" x 1.75"
|
| Swivel Caster for Single Chamber Vacuum Sealer DZ400 (Item #646718) This is a replacement caster for single vacuum chamber sealer machine. 3.25" tall 2.46 wheel pattern 2.17" x 1.60"
|
