| Small Swing Gate (Item #811525) Measures 4.75" x 2 5/8"" with a 1/8" hole.
|
| Large Swing Gate (Item #811530) Measures 5" x 3.75" with a 1/4" hole.
|
| Diamond Spinner Plate (Item #811526) Measures 3.5" x 6.25" point to point with a 1/4" hole.
|
| Ripple Spinner Plate (Item #811527) Measures 4" across with two impellors and a 1/8" hole.
|
| Dish Spinner Plate (Item #811528) Measures 4 7/8" across with four impellors and a 1/8" hole.
|
| Dish Spinner Plate (Item #811531) Measures 4 7/8" across with four impellors and a 1/4" hole.
|
 
| Shark Teeth (Item #811529) Bolt this varmint gaurd to the legs of your feeder and no more varmints. They will want to stay away from your shark teeth. INCLUDES THREE 36" STRIPS.
|
|
Solar Panel for Tomahawk Feeders (Item # 814429) Mounts on back side of Tomahawk Feeders and connects through access hole in back of Tomahawk VL Feeder motors
|
| DuraCell AA alkaline batteries (Item #300009) 8 pack. Works in the Ontime Lifetime Analog Feeder timer.
|
| Gel Cell 12v Battery (Item #300067) Sealed rechargeable battery. 12 volts and 7.0 amps per hour.
|
| Gel Cell 6v Battery (Item #820023) Sealed rechargeable battery. 6 volts and 12 amps per hour.
|
 | Gel Cell Battery 6 v. (Item #820014) 6 v. - 1.3 a.h. 3.75" x 1" X 2.25"H
|
 | Gel Cell Battery 12 v. (Item #820017) 12 v. - 1.3 a.h.- Gives double the power but half the staying power as a 6 volt gel cell of 2.3 a.h. 3.9" X 1.75" X 2.25"H
|
|
Deer Feeder Battery (Item #820024) 6V/4.5 AMP 2.75" X 1.8" X 4.15"H
|
| Battery (Item #820012) Rechargable 6 volt 4 a.h. w/ spade terminals.
|
| Battery (Item #820013) Rechargable 6 volt 4 a.h. w/ spring terminals.
|
| Charger (Item #811031) For rechargable batteries 6 volt 400 m.a.
|
|
| Charger (Item #811052) For rechargable batteries 6 - 12 volt 400 m.a.
|
|
| Internal Funnel (Item #811142) 30 Gallon Barrels
|
|
| Peg Leg Bracket (Item #812521) Mount 2x4 Legs on 30-50 Gallon Metal Barrels
|
|
| Clock Clips (Item #812507) Packet of 5.
|
|
| Lifetime Module Only (Item #811214)
|
 | Lifetime Battery Pack C (Item #812515)
|
 | Bumper Buddy-Receiver Mount C (Item #812405)
|
 | Feeder Ghost Glow LED Light (Item #814438) Hand held and will easily help you track your prey.
|
 | Feeder Barrel w/tripod (Item #812401) This is just the 200 lb barrel and tripod. There is no feeding mechanism.
|
 | Hanging Feeder Barrel (Item #812407) This is just the 200 lb hanging barrel and hanger. There is no feeding mechanism.
|
| 200lb Feeder Tripod (Item #812409) This is only the tripod. Holds a 200lb feeder.
|
| 200lb Feeder Barrel (Item #812522) This is only the barrel. Holds 200lb of feed.
|
|
| Lifetime Battery Pack C (Item #812515)
|
| Digital Timer (Item #811043) This is a replacement digital timer. Fits our numbers 811035 & 811016. Those are the ADF-150 and ADF-25DX Will substitute other timers as well.
|
|
| Digital Timer (Item #811041) This is a replacement digital timer. A great, simple repalcement timer for 6 or 12 volts. 6 adjustable feedings for 1 to 30 seconds.
|
| 12 Volt Solar Charger (Item #811045) Keep the battery on your feeder charged all year without swapping out batteries. And because these 12-volt chargers run entirely off sunlight, recharging won't cost you a penny. The panels are weatherproof, rustproof and corrosion-resistant. Leads are 10-ft. long with alligator clip connectors. Dimensions: 6-7/8"L x 6-1/4"W x 11/16"D.
|
| 6 Volt Solar Charger (Item #811044) Keep the battery on your feeder charged all year. And because these 6-volt chargers run entirely off sunlight, recharging won't cost you a penny. The panels are weatherproof, rustproof and corrosion-resistant. Leads are 6-ft. long with alligator clip connectors. Dimensions: 5-7/8"L x 3-1/4"W x 11/16"D.
|
 | Deer Feeder Motor (Item #811191) 3.25"x 4.5", 12V DC
|
| Small Feeder Motor (Item #811523) Motor for a small feeder.
|
| Spinner Plate (Item #811522) Spinner plate (1/8 in shaft).
|
| Spinner Plate (Item #811521) Spinner plate (1/4 in shaft).
|
| 55 gal poly lid (Item #811520) Poly lid fits 55 gallon feeder.
|
| 900 lb Hand Winch (Item #800399) Perfect for lifting and lowering your feeders or adding feed.
|
| 800 lb Hand Winch (Item #800386) Perfect for lifting and lowering your feeders or adding feed.
|
| Feeder Parts
| Deer Feeders
| Fish Feeders
| Hog Traps
Live Animal Traps
| Fish Traps
| Gill Nets
| Trotlines
| Seine Nets
| Fishing Gadgets
| Turtle and Snake Traps
| Huge Catfish Fishing Contest
