For New Sausage Stuffers, Click Here.
Parts for ProProcessor Manual Sausage Stuffers - Horizontal and Vertical.
 | Canister for 15 Lb. ProProcessor Sausage Stuffer (Item #700255) Speeds up stuffing time when an empty canister can replace the full one. This canister fits the ProProcessor 15 lb. stuffer. 6.625" diameter
|
 | O-Ring for 15 lb. ProProcessor Sausage Stuffer (Item #700253)
|
| Gearbox by Pro Processor (Item #637006) This Pro Processor gearbox will fit the 15 lb. ProProcessor Sausage Stuffer.
|
 | Canister for 20 Lb. ProProcessor Sausage Stuffer (Item #700256) Speeds up stuffing time when an empty canister can replace the full one. This canister fits the ProProcessor 20 lb. stuffer. 8.5" diameter
|
| Threaded Gear Shaft (Item #637019) Gear shaft for 20 lb. manual ProProcessor sausage stuffer. Measures: 21.25" long. Will NOT work on Cabela's products.
|
| Clips for Manual Pro Processor Sausage Stuffer (Item #660150)
|
 | Manual Stuffing Tube Set by ProProcessor (Item #700259) Stainless steel stuffing tube set comes with four sizes 1 1/2", 1 1/4", 3/4" and 1/2". These tubes are made to fit the ProProcessor manual sausage stuffers. Base measures 1.67" or 4.25 mm.
|
 | Canister for 30 Lb. ProProcessor Sausage Stuffer (Item #700257) Speeds up stuffing time when a full canister can be replaced by an empty one. This canister fits the ProProcessor 30 lb stuffer. 8.5" diameter
|
| Canister for 40 Lb. ProProcessor Sausage Stuffer (Item #700258) Speeds up stuffing time when an empty canister can replace the full one. This canister fits the ProProcessor 40 lb. stuffer. 8.5" diameter
|
| Piston for 20 Lb., 30 Lb. or 40 Lb. ProProcessor Sausage Stuffer (Item #637015) Piston includes air lock.
|
|
| Threaded Gear Shaft for 30 Lb. ProProcessor Sausage Stuffer (Item #637018) Measures: 22.75" long.
|
 Will not fit Cabela's Stuffer | O-Ring for 20 Lb.- 40 Lb. Sausage Stuffer from ProProcessor. Works for Vertical or Horizontal stuffers (Item #700254)
|
| Gearbox by ProProcessor (Item #637005) This ProProcessor gearbox will fit the 20 lb., 30 lb. and 40 lb. ProProcessor sausage stuffers.
|
| Gearshaft for ProProcessor (Item #636990) This ProProcessor gearshaft will fit the 20 lb., 30 lb. and 40 lb. ProProcessor sausage stuffers.
|
| Fast gear shaft for ProProcessor (Item #636991) This ProProcessor gearshaft & gear will fit the 20 lb., 30 lb. and 40 lb. ProProcessor sausage stuffers.
|
| Handle for ProProcessor Manual Sausage Stuffer (Item #699649)
|
| Rubber Feet for Manual ProProcessor Sausage Stuffer (Item #699327)
|
| Tube Ring for Manual ProProcessor Sausage Stuffer (Item #699507)
|
Parts for Cast Iron Enterprise Sausage Stuffers & Chop-Rite Sausage Stuffers.
These parts fit Chop-Rite stuffers and most Enterprise and some other brands but they are the only parts still being made for older cast iron sausage stuffers. It may be worth an attempt to rebuild your older stuffer even if it is another brand.
| Large Pluger Plate for #35 Enterprise & Chop-Rite Cast Iron Sausage Stuffer (Item #699751) 8 quart, 8 1/8" in diameter. Also fits #31 stuffer.
|
 | Nut for Chop-Rite or Enterprise Sausage Stuffer (Item #699919) Fits both #35 eight quart, #31 eight quart and #25 four quart stuffers. Fits most cast iron stuffers that use 2 lugs to lock on. Can be altered to fit others. Front center hole is .98 I.D. Back opening measures 1.75" x 1.56" Use with #699324 3/4" tube not #699922
|
| Strainer Basket for #31 Six Quart Enterprise & Chop-Rite Cast Iron Sausage Stuffer (Item #699647) Great for pressing lard or fruit.
|
|
| Strainer Basket for #35 Eight Quart Enterprise & Chop-Rite Cast Iron Sausage Stuffer (Item #699761) Great for pressing lard or fruit.
|
| Strainer Base Perforated for #35 Eight Quart and #31 Six Quart Enterprise & Chop-Rite Cast Iron Sausage Stuffers (Item #699763) Needed with screen above.
|
|
| Small Plunger Plate for #35 Eight Quart and #31 Six Quart Enterprise & Chop-Rite Cast Iron Sausage Stuffer (Item #699757) Needed to fit inside strainer screen above. 7 7/8" diameter.
|
| Side Bolts for #35 Eight Quart Enterprise & Chop-Rite Cast Iron Sausage Stuffer (Item #700067) Made in USA. Includes 2 bolts - 10.5" long.
|
| Crank for #25/#35 Enterprise & Chop-Rite Cast Iron Sausage Stuffers (Item #700052) Has square 1/2" hole. Not available at this time.
|
| Large Cog for Enterprise & Chop-Rite Cast Iron Sausage Stuffers (Item #700065)
|
| Small Cog for Chop Rite & Enterprise Sausage Stuffers (As Noted Above) (Item #700064)
|
 | Rack Screw 8 Quart (Item #700063) This will fit an 8 quart Chop-Rite stuffer and possibly an 8 quart Enterprise. Approx 16 5/8" long. About 1" around.
|
  | Low Gear for Enterprise and Chop-Rite Sausage Stuffers (Item #699807) This sprocket drive is shown above mounted on a Chop-Rite stuffer. Provides 2.5 : 1 power ratio for additional leverage when using the smaller stuffing tubes.
|
| Chain for Sprocket Drive (Item #699808) Chain for sausage stuffer sprocket drive.
|
|
| Strainer Basket for #25 Four Quart Enterprise & Chop-Rite Cast Iron Sausage Stuffer (Item #699762) Great for pressing lard or fruit.
|
| Plunger Plate - Large for #25 Stuffer 4 Quart (Item #699750) 6 1/2" in diameter on left above. For Enterprise & Chop-Rite cast iron sausage stuffer.
|
|
| Strainer Base Perforated for #25 Four Quart Stuffer (Item #699764) Needed with screen above. For Enterprise & Chop-Rite cast iron sausage stuffers.
|
|
| Small Plunger Plate for #25 Four Quart Sausage Stuffer 6 5/16" Diameter (Item #699756) Needed to fit strainer screen above. For Enterprise & Chop-Rite cast iron sausage stuffers.
|
 | Stuffing Tube 3/4" Diameter Aluminum (Item #699324) Fits new sausage stuffer nuts #699919. For standard link and large sausages.
|
|
| Stuffing Tube 3/4" Diameter Aluminum (Item #699922) Fits Chop-Rite & Enterprise sausage stuffers and others that accept 1.5" - 5.5" long. For standard link and large sausages. Fits older stuffer nuts not new #699919 stuffer nut.
|
|
| Stuffing Tube 1/2" Diameter Aluminum (Item #699921) Also fits above stuffers and others that accept 1.5" base. For smaller links - weiners - snack sausages. Good for 23mm casings.
|
|
| Stuffing Tube 3/8" Diameter Aluminum (Item #699920) Also fits above stuffers and others that accept 1.5" base 4.5" long For small beef sticks and snack links Needed for 18mm casings
|
 | Stuffing Tube 1/2" Diameter Aluminum (Item #700136) Also fits above stuffers and others that accept 1.5" base For smaller links - weiners - snack sausages Will accept collagen casings.
|
|
| Stuffing Tube 3/4" Diameter Aluminum - (Item #700137) 5" long. Also fits above stuffers and others that accept 1.5" base.
|
 | Stuffing Tube 3/8" Diameter Aluminum (Item #700135) 5" long 1.5" base Great for small beef sticks and snack links Needed for 18mm casings Will accept collagen casings.
|
Parts for RECENT Weston & Cabelas manual & electric Sausage Stuffers
If you need parts for the electric motor that Weston & Cabela's used on their stuffers about 2010.click here:Will also fit Cabela's stainless steel stuffers with star or splined drive. Click Here for Sausage Stuffing Tubes.
 |
 | Canister for 11 Lb. Stuffer (Item #660118) Speeds stuffing time when a full canister can replace the empty one. This canister fits the Weston and Cabelas 11 lb. stuffer. 5.5" diameter
|
Click Here for Sausage Stuffing Tubes.
|
|
 | Canister for 20 Lb. Stuffer (Item #660117) Speeds stuffing time when a full canister can replace the empty one. This tube fits the Weston and Cabelas 20 lb. stuffer. 15" long 7.5" diameter
|
|
| Key For Round Gears (Item #660106) Fits 20-30 lb. stuffers.
|
|
| Bottom Washer for 20-30 Lb. Sausage Stuffer (Item #660132) Bottom washer fits 20-30 lb. sausage stuffers.
|
|
| Piston Ring (Item #660115) Fits 20-30 lb. sausage stuffers. model number 07-3462-N Measures 7 1/8" diameter. No longer available - Choose 660152 below
|
 | O Ring (Item #660152) We purchased these to be a replacement for the 660115 o-ring above since Cabelas & Weston no longer sell them. There are many of the stuffers that need the 660115 o-ring so we found replacements for it. They are pretty tight so we recommend using Food Grade Silicon Spray to make them easier to push. The number is 699570. Guaranteed replacement or credit.
|
|
| Air Lock (Item #660112) Fits 11 lb., 20 lb. and 30 lb. stuffers.
|
|
| Air Lock Spring (Item #660114) Fits 11 lb., 20 lb. and 30 lb. stuffers.
|
| Stuffer Handle (Item #660129) Fits 20 lb. and 30 lb. stuffers with splined drive.
|
 | Lubri-Film Plus (Item #700150) Use this where any food handling equipment needs to be lubricated.
|
 | Food Grade Lubricating Grease (Item #699918) Prevents wear and corrosion. Longer lasting film allows less lubricant usage and extended re-greasing intervals. Made in the U.S.A. 14 ounces.
|
 | Food Grade Silicone Spray (Item #699570) Stops sticking and prevents rust formation on food packaging and processing equipment. This product is authorized by the U.S.D.A. for federally inspected meat and poultry, plants and for incidental food contact. Spray can.
|
Parts for EARLIER Italian made Weston Sausage Stuffers.
 | O-Ring for Stuffer by Leonardi (Item #700058) This stuffer O-ring fits the Leonardi sausage stuffer. Measures 6 1/8" diameter.
|
 | O-Ring for Sausage Stuffer (Item #699787) This stuffer O-ring measures 5" in diameter and will fit the 6, 11 and 16 lb. Weston sausage stuffer.(Replaced with Item#699791)
|
Parts for SausageMaker Sausage Stuffers.
| O-Ring for 5 Lb. Sausage Stuffer (Item #699731) Replaces o-ring on 5 lb. stuffer piston.
|
| O-Ring for 15 Lb. Sausage Stuffer (Item #699730) Replacement o-ring for 15 lb. sausage makers and stuffers.
|
|
| O-Ring for Trespode Sausage Stuffer (Item #699788) This stuffer o-ring fits the Facem Trespode. Measures 5.12" in diameter.
|
Home | Meat Grinders | Meat Grinder Parts | Sausage Stuffers | Meat Tenderizers | Vacuum Chamber Sealers | Manual Meat Grinders Meat Slicers | Electric Butcher Saw Blades | Electric Butcher Saws | Books & Videos | Sausage Spices | Meat Mixers | Bowl Choppers | Knives | Patty Presses | Wrapping Paper & Accessories | Sausage Casings & Twine | Meat Curing and Smoking | Site Map | Xml Sitemap | Video Sitemap | ROR Sitemap
